The heavy-duty connector of the company today explains the accessories, which refer to the parts or components of the assembly machinery; or the parts or components that are reinstalled after damage. Accessories can be divided into two categories: standard accessories and optional accessories. So you know the accessories to maintain?
Avoid reversing
The engine cylinder head gasket can not be reversed during installation, otherwise the cylinder head gasket will be ablated and damaged prematurely; the engine fan blades should not be reversed when installed; for the directional pattern tires, the chevron pattern tires,
The ground print after installation should have the cheektip pointed to the back.
Avoid missing
Engine valve locks shall be installed in pairs. If they are missing or missing: they will cause the valve to run out of control and crash the piston; etc.; engine connecting rod bolts, flywheel bolts, cotter pins installed on the drive shaft bolts,
Locking devices such as locking screws, bumpers or spring pads,
Once it is leaked, it will cause serious failures during use. If the oil nozzle used to lubricate the gears in the engine timing gear chamber is leaked, it will cause serious oil leakage.
Avoid overheating
If the engine piston temperature is too high, it will easily lead to overheating and melting, and the cylinder will be overheated; rubber seals, triangle tapes, tires, etc. will overheat, easy to premature aging, performance degradation, shortened service life; starter,
The coils of electrical equipment such as generators and regulators are overheated and are easily burned and scrapped.
Avoid being dirty
If the fuel filter, oil filter, air filter, hydraulic oil filter, and various types of filters are too dirty, the filtration effect will be poor. Water tank fins, air-cooled engine block and cylinder head fins,
Parts such as cooler fins are too dirty, resulting in poor heat dissipation and high temperatures.